Skip navigation.
Enlightening Research

this site has not been updated since 2017... visit us @  to learn about new products and services!

Applications of LandMapper handheld for near-surface soil surveys and beyond

LandMapper - fast, portable, versatile, affordableOn-the-go sensors, designed to measure soil electrical resistivity (ER) or electrical conductivity (EC) are vital for faster non-destructive soil mapping in precision agriculture, civil and environmental engineering, archaeology and other near-surface applications. Compared with electromagnetic methods and ground penetrating radar, methods of EC/ER measured with direct current and four-electrode probe have fewer limitations and were successfully applied on clayish and saline soils as well as on highly resistive stony and sandy soils. However, commercially available contact devices, which utilize a four-electrode principle, are bulky, very expensive, and can be used only on fallow fields. Multi-electrode ER-imaging systems applied in deep geophysical explorations are heavy, cumbersome and their use is usually cost-prohibited in many near-surface applications, such as forestry, archaeology, environmental site assessment and cleanup, and in agricultural surveys on farms growing perennial horticultural crops, vegetables, or turf-grass. In such applications there is a need for accurate, portable, low-cost device to quickly check resistivity of the ground on-a-spot, especially on the sites non-accessible with heavy machinery.

Four-electrode principle of EC/ER measurements

Our equipment utilizes well-known four-electrode principle to measure electrical resistivity or conductivity (Fig).

LandMapper® measures potential difference (dV) which arises between two electrodes (M and N), when electrical current (I) is applied to other two electrodes (A and B). The increase of the distance among four electrodes in a set allows measuring resistivity of the deeper layers, f.e. probe of A2M2N2B2 reaches deeper than A1M1N1B1 (Fig). In theory, electrical resistivity (ER) of a material is defined as follows: clip_image004

where L is the length of a uniform conductor with a cross-sectional area A. A/L is a geometrical coefficient (K), which is easily calculated for different in-situ electrode arrangements and laboratory conductivity cells. LandMapper® calculates electrical resistivity using formula: Ohm's law .

The direct digital output of the device is electrical resistivity (ER) in Ohm m. Those can be converted automatically in electrical conductivity (S/m) inside LandMapper® ERM-02 by using reciprocal of the measured resistivity: EC=1/ER.

Thus, the measured results may as well be presented in convenient for soil scientists form of soil electrical conductivity (EC), which is routinely used to evaluate salinity of soils and irrigation water. However, EC can be used in many more applications than just soil salinity! Also ERM-02 can output natural electrical potential (EP) of soil and plants, which has some specific applications in hydrology, civil engineering, forestry and biology.

Applications of EC/ER technology in soil studiesLandmapper - surveying frozen soils in Antarctica

Mapping of soil properties highly influencing density of mobile electrical charges (measured EC/ER strongly correlates with those properties in-situ):

  1. Soil salinity
  2. Soil texture (i.e. silt, sand and clay contents, working formula needs to be developed)
  3. Coarse fragment content and depth to bedrock
  4. Depth to limiting layers like clay and plough pan (wastewater - leaching fields)
  5. Groundwater depth - capillary rise extent in profile
  6. Correlations between soil EC maps and yield maps for many crops were established
  7. Depth and extent of permafrost.
  8. Pollution detection - depth and limits (pollution during oil and gas mining, for example)
  9. Location and stability of karsts and carbonate sink holes.
  10. Mapping of soil disturbance and search for hidden objects (drainage pipes, urban underground communications, forensic and archaeological applications).
  11. Estimating depth of peat deposits during prospecting and locating methane accumulations in natural bogs and swamps.

Landmapper - monitoring methane emission in bogs on North Siberia

Monitoring processes where only one soil properties changes:


12. Soil water content changes

13. Monitoring fertilizer uptake and other solute transport in soils (f.e. during phytoremediation)

14. Monitoring of freezing-melting processes in soil

15. Mapping and monitoring leakage from the retention ponds and sewage ponds, and underground oil storage tanks.


Applications in soil genesis studies:

Many soils of humid areas developed under downward leaching and typically feature the elluvial horizon with very high resistivity.

16. The thickness of horizons, the degree of eluviations and soil profile organization can be evaluated either without digging soil pits or by quick checking EC on the walls of soil pits.

17. Measuring of soil vertical and horizontal anisotropy non-destructively.

Special applications beyond soil studies:

Landmapper - ER of the tree18. Forestry – in addition to evaluating all important soil properties of forest soils, monitoring ER of a growing tree can indicate wood quality and if plant is stressed (also electrical potential is especially useful in plant health studies as non-penetrating electrodes can be mounted on surface of herbaceous plants).

19. Evaluating and monitoring stability of the roads (seasonal, gr avel, asphalt, on permafrost or landslides, etc.).

20. Measuring integrity of underground electrical cables and pipes (and soil corrosive properties).

21. Monitoring charge-recharge processes in membrane resins in water purification plants or consumer distillers.

22. ….? Can you think of any other possible applications that can benefit if electrical conductivity/potential of a natural system could be measured quickly and non-destructively?

We at Landviser, LLC would like to hear from you! Post a comment, or email us at




Richard Feynman once said: “There is not a single phenomenon in Nature which is not driven by electricity to some extent. ” (quote paraphrased). Richard Feynman (1918-88) had an enormous talent of explaining complicated scientific matters to non-scientists. Watch this short video where he admires wonders of electricity in the dentist’s waiting room – “Electricity is bigger than gravity!”



Jonesboro, AR 35° 50' 32.2692" N, 90° 42' 15.4044" W
Krasnoyarsk 56° 0' 38.8404" N, 92° 51' 9.99" E

I blog often and I seriously

I blog often and I seriously appreciate your information. This great article has truly peaked my interest. I'm going to book mark your site and keep checking for new details about once per week. I opted in for your Feed as well.


Javascript is required to view this map.